4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ Based on SIM7600E-H support dial-up Компьютеры и офис - купить

Купить 4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ Based on SIM7600E-H support dial-up | Компьютеры и офис

Note: the SIM7600E-H 4G HAT ONLY available in Southeast Asia, West Asia, Europe, Africa.otherwise it can't be used.

Please check the supported bands according to your local service provider, select the proper one when placing order

DESCRIPTION

4G/3G/2G/GSM/GPRS/GNSS HAT for Raspberry Pi, Based on SIM7600E-H Overview

The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption.

You can connect this 4G module with computer to surf the Internet, or attach it onto Raspberry Pi to enable functions like 4G high speed connection, wireless communication, making telephone call, sending SMS, global positioning, etc.

Note: this is a region-specific module, please check the supported bands before placing order.

Features Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc. Supports GPS, BeiDou, Glonass, LBS base station positioning Onboard USB interface, to test AT Commands, get GPS positioning data, and so on Onboard CP2102 USB to UART converter, for serial debugging Breakout UART control pins, to connect with host boards like Arduino/STM32 SIM card slot, supports 1.8V/3V SIM card TF card slot for storing data like files, messages, etc. Onboard audio jack and audio decoder for making telephone call 2x LED indicators, easy to monitor the working status Onboard voltage translator, operating voltage can be configured to 3.3V or 5V via jumper Baudrate: 300bps ~ 4Mbps (default: 115200bps) Autobauding baudrate: 9600bps ~ 115200bps Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set) Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) Communications Specifications LTEWCDMA / TD-SCDMA / CDMA 2000EDGEGSM/GPRS

Band	LTE-FDD B1/B3/B5/B7/B8/B20 LTE-TDD B38/B40/B41	UMTS/HSPA+ B1/B5/B8	GSM/GPRS/EDGE 900/1800 MHz
Generation	4G	3G	2.5G	2G
Emitting power	0.25W		0.5W@EGSM900 0.4W@DCS1800	2W@GSM900 1W@DCS1800
Data Speed	LTE CAT 4 Uplink≤50 Mbps Downlink≤150 Mbps	UMTS Uplink≤384Kbps Downlink≤384Kbps HSPA+ Uplink≤5.76Mbps Downlink≤42Mbps	EDGE Uplink≤236.8kbps Downlink≤236.8kbps	GPRS Uplink≤85.6kbps Downlink≤85.6kbps
SIM Card	Normal SIM (Not Included)
Applicable Region	SIM7600E-H 4G HAT is mainly applicable in Southeast Asia, West Asia, Europe, Africa, SIM7600CE 4G HAT is mainly applicable in China. Please check the supported bands according to your local service provider, select the proper one when placing order.

GNSS Specifications Receiver type 16-channel C/A code Sensitivity Tracking: -159 dBm (GPS) / -158 dBm (GLONASS) / TBD (BD) Cold starts: -148 dBm Time-To-First-Fix (open air) Cold starts: <35s Hot starts: <1s Accuracy Position: <2.5m CEP SMS and Audio Specifications SMS Supported types: MT, MO, CB, Text, PDU Storage: USIM card and ME (default) Audio feature Supports echo cancellation Supports noise reduction Other Specifications Power supply: 5V Operating voltage: 5V/3.3V (configured via jumper) Operating temperature: -30°C ~ 80°C Storage temperature: -45°C ~ 90°C Dimension: 56.21mm x 65.15mm What's on Board SIM7600E-H CP2102 USB to UART converter NAU8810 audio decoder TXS0108EPWR voltage translator: translates 3.3V/5V into 1.8V MP2128DT power chip MP1482 power chip Raspberry Pi GPIO header: for connecting with Raspberry Pi SIM7600 control interface: for connecting with host boards like Arduino/STM32 SIM card slot: supports 1.8V/3V SIM card TF card slot: allows file/SMS/... storage 3.5mm earphone/mic jack USB interface: for testing AT Commands, getting GPS positioning data, etc. USB to UART interface: for serial debugging, or login to Raspberry Pi MAIN antenna connector AUX antenna connector GNSS antenna connector Power switch Network status indicator Power indicator Operating voltage selection jumper:
VCCIO - 3.3V: set operating voltage as 3.3V
VCCIO - 5V: set operating voltage as 5V UART selection jumper:
A: access Raspberry Pi via USB to UART
B: control the SIM7600 by Raspberry Pi
C: control the SIM7600 via USB to UART Dimension

Development Resources

Wiki : waveshare.com/wiki/SIM7600E-H_4G_HAT

PACKAGE CONTENT

Weight: 0.172 kg

Note: the Raspberry Pi in the photo is NOT included.

SIM7600E-H 4G HAT x1 LTE Antenna x1 GPS External Antenna (B) x1 USB type A plug to micro plug cable x2 RPi screws pack (2pcs) x1