Liitokala Lii-202 1.2V 3.2V 3.7V AA AAA 18650 Charger+2PCS New NCR18650B 3400mAh Rechargeable Battery Электроника - купить

Купить Liitokala Lii-202 1.2V 3.2V 3.7V AA AAA 18650 Charger+2PCS New NCR18650B 3400mAh Rechargeable Battery | Электроника

Shipping list: Lii-202 Charger 1PCS

NCR18650 3400mAh 2PCS

Product Description

Specification:

New Original 18650 NCR18650B Rechargeable Li-ion battery 3400mAh 100% authentic

Nominal voltage : 3.7V

Capacity: 3050-3400MHA

Size: 18.2mm x 65mm

Weight : 46g/pcs

Note: This product can not be used in Electronic smoke and other high-power Electronic equipment.

warming:

this charge is only for charging the cylindrical lithium-ion (3.7, 3.8), Ni-Mh / Ni-Cd, LiFePO4 (Li-Ion) batteries. Please read these instructions before use; pay attention to the recommended charging current, never choose the wrong charging current when the charge with 5V USB AC adapter, 2A-current AC adapter recommended Charger ma hot during operation for a long time, handle with care! please cut off the electricity and remove the battery from the charger when charging is complete. indoor condition only !! data mapping Charger for reference only; please refer to professional instrumentation, if you need accurate data 2. Features and Specifications: Micro USB DC 5V input, two independent slots and charging channels with built-in micro-computer control system to ensure high efficiency Two charging current parameters (0.5A / 1.0A) Four LED indicators show the charging status (25%, 50%, 75%, 100%), and also shows the battery type, if inserted into the battery (1.2 V Ni-Mh, 3.2 in Li-Fe, 3.7 in Li-Ion, 3.85 in li-ion) automatically identify Li-Ion and Ni-Mh; But, you need to adjust the charging mode for LiFePO4 and 3.85 in the lithium-ion battery it can actively 0 V battery, but the device does not charge a 1.65 V ~ 1.85 V batteries types. built with excessive charging protection, over-discharge protection and protection of polar reverse. besides, it can detect a broken battery. Charing mode: instantaneous current and voltage. PERMANENT charging current: Operating voltage in the 5V-2A (Micro-connector) Standard automatic 5 V / 1000 mAh USB output port 3. Select the button, LED and function. MODE button: click to select the type of battery when inserting the battery. it will begin to charge the battery after fixing the battery type (please noted that it will automatically identify Li-Ion and Ni-Mh, no need to choose manually) press and hold for 2 seconds, when after connecting to power, it can be switched between charging current of 0.5A and 1.0A; Led indicator connect the charger to power, all LED indicators will be on when the battery is inserted after 5 seconds, the LED will be turned off except for the indicator 0.5A current when the battery is inserted into the device, 4 LEDs will be turned on and 3.7 V LED indictors blink, then please press the MODE button to set the correct type of battery. it will begin to charge the battery after 5 seconds, and the LED indictors show the charging status. Press the MODE button to show the type of battery (5 seconds) during charging and return to show the charging status it can show the remaining battery power, if you put the battery in the charger (with no connection to the power charging) USB output indicator: When the USB output is detected, the volume of the battery indicators will be on for 10 seconds and then off, press the button to show the battery volume speed. 4. Specification: Input: Micro USB DC 5V / 2A Output: 1.4, 4.2V ± 05, 3.65 ± 05, 4.35 ± 05 Output Current: 500/1000 mAh constant voltage charging cut-off current: <100 mAh Standby Current: <15 mAh 5. USB output function USB output load voltage: 4.90 V-5.30 Output Current: 1000 mAh (1A) Idle Current: <1 mAh the output voltage of 4.75 V-5.25 V, when the current 1000 mAh output over-voltage protection: 3.0 ± 1 6. Compatibility li-ion / IMR: 18650, 18490, 18350, 17670, 17500, 16340 (RCR123), 14500, 10440 7. Size 112 mm × 60 mm × 30 mm / 86 g + 15 g USB cable