Регулятор газа двухступенчатый с входным давлением 3000PSI и выходным 100PSI изготовленный из нержавеющей стали ss316L никелевым покрытием креплением CGA320 - купить

Купить Регулятор газа двухступенчатый с входным давлением 3000PSI и выходным давлением 100PSI, изготовленный из нержавеющей стали ss316L с никелевым покрытием, с креплением CGA320.

Description

3000PSI Inlet 100PSI outlet pressure ss316L/nickel plating dual stage co2 gas pressure regulator With CGA320 fitting

Specification

---Model NO: R31

---Type: dual stage pressure regulator

---Inlet pressure gauge range: 0-3000PSI

---Outlet pressure gauge range:0-100PSI

---Inlet connection:CGA320

---Outlet connection: 1/4 hose barb fitting

---CV:0.06

Product details

Pls note: the price included a regulator, two regulators, one cylidner fittings, a hose barb fitting. If you have difference betwen specification we mentioned, pls leave message.

Or you can choose the below information:

m	Body Material	Body Hole	Inlet pressure	Outlet pressure	Gauge	Inlet connection	Outlet connection	Optional
R31	L:ss316L	M	D:3000PSI	G:0-125psi	G:Mpa	00:1/4NPT F	00:1/4"NPT F	P:panel mount
	B:brass	Q	F:500PSI	I:0-75psi	P:psi/bar	01:1/4"NPT M	01:1/4"NPT M	R:attached safety relief valve
				K:0-25psi	W:no gauge	23:CGA330	10:1/8O.D.	N:attached needle valve
				L:0-15psi		24:CGA350	11:1/4O.D.	D:attached diaphragm valve
				Q:30"Hg Vac-30psig		27:CGA580	12:3/8O.D.
				S:30"hg Vac-60psig		28:CGA660	15:6mmO.D.
				T:30"hg Vac-100psi		30:CGA590	16:8mmO.D.
				U:30"Hg Vac-200psi		52:G5/8"-RH(F)	74:M8*1-RH(M)
						63:W21.8-14H(F)
						64:W21.8-14LH(F)

Once you place an order, pls send order code e.g.:R31-L-M-D-G-P-00-00-P. Or pls send us following information so that we select select model:

Please leave a message including the following parameters when order:

1. Media: what gas will the pressure regulator be used for?

2. Inlet actual working pressure(not pressure gauge range):

3. Outlet acatual working pressure(not pressure gauge range):

4. Inlet end connection: such as 1/4"NPT female threaded, 6mm ferrule(connected to 6mm outside diameter tube), CGA320, CGA350, CGA580 and so on.

5. Outlet end connection: such as 1/4"NPT female threaded, 1/4" ferrule(connected to 1/4" outside diameter tube), 8mm hose barb and so on.

6. If you have special requirements for flow rate, please indicate.

We will equip the pressure regulator according to your description. Thanks for your attention.

General Description about R31

R31 Serie stainless steel pressure reducers, double-stage diaphragm pressure reducing construction, stable output pressure, applied to high pure gas, standard gas, corrosive gas and so on

Design Features

l Five holes on the body

l two-stage decompression structure

l Metal-to-metal diaphragm seal

l Body thread: 1/4” NPT(F)

l Easy to clean inside

l Filter inside

l Panel mounting and wall mounting available

l Optional outlet: needle valve, diaphragm valve

Specification

l Maximum inlet pressure: 3000, 500psig

l Output pressure:0~25, 0~50, 0~100, 0~250psig

l Safe testing pressure: 1.5 times maximum inlet pressure

l Working temperature: -40℉~+165℉(-40℃~+74℃)

l Leakage rate: 2×10-8 atm.cc/sec

l CV value=0.06

Typical Application

l Laboratory

l Gas laser

l Gas bus-bar

l Petrochemical industry

l Testing equipment

Material

l Body: 316L, Brass

l Bonnet: 316L, Brass

l Diaphragm: 316L

l Strainer: 316L(10μm)

l Seat: PCTFE, PTFE, Vespel

l Spring: 316L

l Stem: 316L

---