Total Black solar panel 20w flexible cell ETFE Film Coating semi battery charger 12V Электроника - купить

Купить Total Black solar panel 20w flexible cell ETFE Film Coating semi battery charger 12V | Электроника

20W 18V ETFE Semi Flexible Monocrystalline Solar Panel with MC4 Connectors for 12V Charge Battery on Boats, Motor

Technician Specification

Length	410mm	Weight	0.4 kg
Width	340 mm	Main material*	Mono crystalline
Height	2.5 mm	Frame material	EVA+PET+ETFE FILM

Electrical Specification

Performance Under Standard Test Conditions(STC*)

Maximum power	Pmax	20 Wp
Open circuit voltage	Voc	19.5 V
Maximum power point voltage	Vmpp	17.5 V
Short-circuit current	I sc	1.22 A
Maximum power point current	I mpp	1.13A

Minor reduction in efficiency under partial load conditions at 25degC: at 100 W/m2, 95%- (+/-3%) of the STC efficiency (1000 W/m2) is achieved.

Component Material

Cells per module	36	Cell dimensions	125mm*125mm
Cell type	Monocrystalline Silicon	Front	tempered glass (EN12150)

System Intergration Technician

Maximum system voltage SC II	1000 V	Maximum reverse current	5 A
Maximum system voltage USA NEC	600 V	Increased snowload acc. to IEC 61215	5.4 kN/msup2;

Thermak Characteristics

NOCT	47 degC	TC Voc	-0.33 %/degC
TC Isc	0.042 %/degC	TC Pmpp	-0.45 %/degC

Extra Specification

PTC rating	20 W	Module efficiency	21.0%
Junction box	IP67	Plus-Sorting*	Pflash ge Pmax
Connector	MC4	Power tolerance*	+/- 3 %

Products Display

Products Detail 1.Mono solar cell

1) Efficient PV conversion, stable performance
2)Unique etching process can increase the short-circuit current of the solar cell
3)Advanced PECVD technology provides well-proportioned navy blue silicon nitride anti-reflection velum
4)Screen printing patterns are accurate and smoothness of the electrode is improved thus making the cell easier for welding and laser cutting

2.Front Cover ETFE FILM

1)Increase conversion efficiency by 5%
2)Enhanced surface abrasion resistance
3)High anti-fouling
4) Easy to clean

3.Backsheet TPT

The back sheet of the module is a key package material applied to the module and is mainly composed of a weather-resistant fluorine material and a PET with excellent electrical insulation properties. The service life of such products is generally designed over 25 years, and the back film is the key to ensure such a long life. The solar module back film is located on the outer layer of the module, and the solar panel back film should have high electrical insulation, high weather resistance, high adhesiveness, and low water vapor transmission rate.

4.Junction box

1)With excellent resistance to high and low temperature, fire, aging and UV resistance, it can meet the long-term use requirements under harsh outdoor environmental conditions.
2) Excellent waterproof and dustproof effect, sealed by pouring glue.
3)Compact size, compact and practical structure, suitable for thin film photovoltaic modules, widely used.
4)The connection of the bus bar and the cable are respectively welded and crimped, and the electrical performance is safe and reliable.

5.MC4 Connector

1)Highly robustness, UV-Resistance
2)Connector adopts touch and insertion of reed with inner-knob type
3)Auto-lock equipment of male and female points enable connection more easy and reliable
4)Popular figure suits most of field installation
5)Accommodates PV cable with deferent insulation diameters
6)The maximal working current will be changed when fixed with different types of diode

Production Line Standard Automatic Production Line

At HETECH Solar, we scour the globe in search of the most suprior materials the industry has to offer. Combined with our near fully automated manufacturing system, we offer consistently high power modules that will last a lifetime. Each material has been carefully tested to meet our best in class standards.

1.Solar cell test

New technology and most superior materials offered. combined with our automated and semi-automated manufacturing and testing system, make sure Solar cell modules high efficiency.

2.Welding

String creation by interconnecting the single photovoltaic cells, then interconnection of the strings in order to create an electrical circuit.

3.Lamination layer

Automatic pick up, rotation and positioning of the strings welding to the glass with high quality encapsulant material.

4.EL Test

EL test is able to highlight information that normally is not detectable with visual inspection, power measurement or IR testing, it is possible to identify micro cracks, degradation and shunted area on cells.

5.Lamination

During this process, the encapsulant material cures and the muti-layer sandwich becomes one unit.

6.Trimming and Framing

Removals of surplus material along the sides, then install the aluminum frame around the module.

7.Power test & IV.

I-V curve acquisition in STC condition for the measurement of the peak power. It is to make sure all our finished solar panels could be used with high efficiency before delivery.

8. Package & Delivery

Environment-friendly and strong packing materials are used to protect the products from damage and ensure that the customers receive the goods in good condition without any damage, and the reasonable and professional packaging method is convenient

to load and upload during transporting and save transportation costs.

About Us

Jingyang Solar Energy is an international high-tech and growing group company, established in 2009, with 10 years’ experience of solar modules manufacturing and PV power generation systems supplying. Our factory covers an area of 10,000 square meters, employing 150 peoples, with an annual production of 500MW, about USD50 million of annual production value.

Jingyang Solar Energy is mainly engaged in crystalline silicon solar cells, modules, photovoltaic systems engineering and the research, manufacturing and sales of PV application products. In the past decades, Jingyang Energy built a wide sales network in global market which covers more than 68 countries, our major target markets are Europe, USA, Southeast Asia, America, Australia, Africa, etc, Our overseas projects involves State grid solar power plant, household solar system, outside portable solar system,etc

Project Case Packing & Delivery Packing

Normally packing: 1pc/2pcs/3pcs/10pcs/25pcs per carton
Individual packing requirement is acceptable.

Shipping Information For Europe Client: Ship from Spain or Czech or German Warehouse, including VAT TAX, 5-7 days arrival via DHL or Correos. For USA Client: Ship from USA Warehouse, including VAT TAX, 5-7 days arrival via FEDEX. For Russia: Ship from Moscow Warehouse, including VAT TAX, Fast arrival via Russia Post. More Oversea Warehouse will open later. For Spain Island and France Island, there may be extra remote freight cost, so if there were remote cost, then we will contact with buyer. For USA Client: there are remote area as well, so if your area belongs to remote area, we will contact with you as well.

Contact Us

Name	Thomas Chen
Mob	+86 18105476899; 86-537-4418896
Whatsapp	+86 15589734528
Skype/Wechat	thomas.chen829
Email	info at jingyangsolar.com; sevice at jingyangsolar.com
Web	https://jingyangsolar.com
Address	Room 103-108, 4/F,No. 4 Building,renhe building, jingxuan west road, qufu city, jining city,shandong province,China(273100)