1pc HRC55 R0.5*D8*47*100L*2F Tungsten solid carbide Coated Tapered Ball Nose End Mills taper and cone endmills Инструменты - купить

Купить 1pc HRC55 R0.5*D8*47*100L*2F Tungsten solid carbide Coated Tapered Ball Nose End Mills taper and cone endmills | Инструменты

Tapered Ball Nose End Mill / Cone Cutters:

Model:R0.5*D8*47*100L*2F; Made of: imported tungsten steel carbide from Germany; Flutes: 2 Flutes; Worked material HRC: 0~55 Degree Radius(R): 0.5mm; Coating: Tialn; Shank Diameter: 8mm; Cutting Length (L1): 47mm; Overall Length (L): 100mm;

All Tapered Ball nose end mills link is below:

Super Discount:

R0.25*20.5*D4*50 Click Here!

Inch Units:

CP-R0.5-1/4"-1-1/4"-3" Click Here!

CP-R1.0-1/4"-1-1/4"-3" Click Here!

Metric Units:

R0.25*15*D4*50 Click Here!

R0.5*15*D4*50 Click Here!

R0.75*15*D4*50 Click Here!

R1.0*15*D4*50 Click Here!

R0.25*20*D6*50 Click Here!

R0.5*20*D6*50 Click Here!

R0.75*20*D6*50 Click Here!

R1.0*20*D6*50 Click Here!

R0.25*30.5*D6*75 Click Here!

R0.5*30.5*D6*75 Click Here!

R0.75*30.5*D6*75 Click Here!

R1.0*30.5*D6*75 Click Here!

R1.5*30.5*D6*75 Click Here!

R2.0*30.5*D6*75 Click Here!

R2.0*100*D6*100 Click Here!

R0.5*45*D8*85 Click Here!

R1.0*45*D8*85 Click Here!

R1.5*45*D8*85 Click Here!

R2.0*45*D8*85 Click Here!

R1.0*25*D6*75 Click Here!

R2.0*70*D10*110 Click Here!

Suitable For:

Cutting, end milling, slotting on:

Stainless-steel, cast iron, copper, aluminum, carbon steel, die steel, etc; Hard wood, plywood, etc;

Features:

Use top quality imported tungsten steel carbide from Germany; Excellent chip removal effect! High surface finish, excellent work! Long service life;