Три штуки драйверов шагового двигателя Leadshine AM882 с датчиком до 80VDC / 8.2A и разрешением 512 микрошагов - купить

Купить 3 шт. Драйвер шагового двигателя Leadshine AM882 с бесконтактным детектированием до 80VDC / 8.2A с разрешением 512 микрошагов.

Brand NameNoneModel NumberAM882Motor TypeStepper MotorMeasurement unitpiece/piecesEach pack3Output Current0.1 ~ 8.2A (RMS 5.86A)Input Voltage20~80VDCMatched Stepper MotorNEMA 23 ~ 34is_customizedYes

Unavailable in 

Description

What’s in Box?

• 3 × LeadShine's Stepper Motor Driver, AM882 • 1 × Breakout Board & DB25 cable (for-free offering) Item Description This stepper motor driver AM882 is supplied by one of the China's top stepper motor drive suppliers. The AM882 is a versatility fully digital stepping drive based on a DSP with advanced control algorithm. The AM882 is the next generation of digital stepping motor controls. It brings a unique level of system smoothness, providing optimum torque and nulls mid-range instability. Motor self-test and parameter auto-setup technology offers optimum responses with different motors and easy-to-use. The driven motors can run with much smaller noise, lower heating, smoother movement than most of the drives in the markets. Its unique features make the AM882 an ideal solution for applications that require low-speed smoothness. The AM882 builds the *sensorless stall detection function to eliminate the cost of feedback device and cabling. Apart from the auto configuration, it has extra 16 selectable built-in auto-configuration parameters which are best match to Leadshine stepping motors. *Note: At present the AM882 only detect motor stall when running speed >300RPM. The AM882 is suitable for a wide range of stepping motors, from NEMA frame size 17 to 34. It can be used in various kinds of machines, such as laser cutters, laser markers, high precision X-Y tables, labeling machines, and so on. Its unique features make the AM882 an ideal solution for applications that require both low-speed smoothness and high speed performances. Key Features: Stepper Motor Driver Specifications • Electrical Specs

• Pin Assignment and Description

The AM882 has two connectors, connector P1 for control signals connections, and connector P2 for power and motor connections. The following tables are brief descriptions of the two connectors.

Connector P1 Configurations

Connector P2 Configurations

• DIP Switch Settings Dynamic current setting (SW1~SW3)

Microstep Resolution Selection (SW5~SW7)

Breakout Board Key Features • Can connect 6 drives and control 6 motors at the same time. • Built-in DB25 female connector. • DB25 connector output pinout: P1~P9, P14, P16, P17. • DB25 connector input pinout: P10~P13, P15. • DB25 GND pinout: P18~P25. • +5VDC power supply can be connected. • Support MACH3 software. • Built-in optical-coupler. Output & Input Signals

Output Signals

Input Signals

• P10~P13, P15 - could be set for emergent stop and X, Y, Z limit switch

Transaction Terms

---